Printing:

  • Printed Full Colour digitally via Over-printing.
  • Supply as actual size, press-ready PDF only, at actual size e.g DL+ is 235mm x 114mm (no reg. marks reqd)

Best to keep 4mm clear zone all around from the edges of the prepaid envelope.

ENVELOPE PRINTING ARTWORK NOTES:

  • NO registration marks are required. Supply as ACTUAL SIZE only (even if you have Bleed to the edge).
  • Set all artwork to CMYK (no Grayscale or RGB allowed as colour shifts will occur) for best results. Any existing spot colour Pantone ink references should be converted completely to CMYK only.
  • If picking any of the DL Window variants, you must leave 4mm Clear Zone around Window area!
  • Convert all Fonts to paths/outlines before making PDF.
  • Avoid text less than 5pt. Avoid Serif fonts under 6pt.

Printing cannot occur on any of the edges or creases, as the Envelope is Over-printed only (and not flat-sheet).

NOTE: Ink will run if it gets wet!

These are not intended to be used in continuous outdoor environment. Given the nature of envelopes, the paper and content should remain dry. Please manage your own or your customers' expectations in lieu.

Ink Coverage:

Standard 30% INK COVERAGE:

  • Usually that means a small company Logo block + text, or a partial tint with lighter colours over part of the canvas.
  • Majority of the envelope canvas is left blank White.

Prepaid Sizes:

  • DL+ (235mm wide x 114mm high).
  • Flap is always at the top (wallet Trapezoidal machinable flap).
  • Save your PDF as actual size (NO crop or reg. marks!) at canvas size of 235 x 114 only.
  • C5+ (235mm wide x 162mm high).
  • Flap is always at the top (wallet Trapezoidal machinable flap).
  • Save your PDF as actual size (NO crop or reg. marks!) at canvas size of 235 x 162 only.

Flap Type:

  • Flap depth on reverse is 38mm deep on 90gsm Gummed.
  • All flaps are DOWN by default.
  • All flaps are Wallet (top, long edge) only.
 

GUMMED MACHINABLE DL+
90gsm Gummed Mailing White – optional

  • 235mm x 114mm.
  • Trapezoidal flap depth on reverse is 44mm deep at centre point.
  • Gummed Machinable Flaps are Top, Long-Edge Wallet.
  • Flaps are DOWN by default.
  • DL+ Window variant has Window Dimensions of 93mm wide x 45mm deep, positioned 51mm from Top Edge; 20mm from Left Edge and 18mm from Base edge.
  • 4mm WHITE Quiet Zone to be left around Window area.
You may upload jpg,jpeg,gif,png,eps,ai,pdf,zip,tar,rar,cdr,psd,svg images. File should not be larger than 50MB in size.
*

You can Upload your Artwork Later from --- My Account > My Orders